---

Crash Conditions (2 of 2)

If an In-flight Limitation is indicated, select Crash Reset 20s. The pilot will then have 20s to fly out of the condition before Total Freeze is reset.

If a Crash is indicated:

• Select Crash Reset 20s to reset the aircraft to the take-off position on the currently active runway, or
• Select Reposition Page which displays Reposition page to allow you to select a reposition for the aircraft.

If you want the aircraft to continue flying even if an in-air crash is detected, select Crash Inhibit. This disables the crash monitoring system so that the simulation does not stop if one of the in-air crash conditions is detected.

Select Reset Advisory to cancel advisory warnings.